A custom-built gaming PC is chosen based on your games, monitor and total budget. An expensive configuration is not automatically suitable for you: balance between components and how you use the computer matters. This guide explains the order of decisions before buying parts.
Quick answer: Prepare a list of 3–5 games, monitor resolution and refresh rate, budget, and components already available. Then compare complete configurations, including power supply, cooling, assembly and any licenses included separately in the offer.
1. Start with games and monitor
Resolution represents the number of pixels displayed; refresh rate, in Hz, shows how many times the monitor can update per second. FPS (frames per second) describes how many images the game produces. The two values are related but not identical.
In competitive games you may look for low latency and a high number of frames. In games with complex graphical effects, the video card and visual settings can become the main limit. For 1440p or 4K, check tests at the desired resolution, with the same settings and specifying frame generation usage. More frames than the monitor refresh rate can reduce latency in certain conditions; however, they are not equivalent to displaying all frames generated.
2. Divide the budget across the whole system
- Video card: choose the performance and video memory needed for your games, not just the series name.
- Processor: check performance in games and applications, including frame stability. A top model does not automatically compensate for an insufficient video card.
- RAM: 16 GB can be enough in some configurations; 32 GB offers more space for demanding games and simultaneous applications. Game requirements and actual usage determine the choice.
- Storage: SSD (solid-state drive) reduces access times compared to a hard disk. A capacity of 1 TB can be a starting point, but check the size of your library.
- Power supply, case and cooling: must be properly sized. Improper temperatures or power can cause performance throttling or instability.
Do not allocate a rigid percentage to each part. Two people with the same budget may need different configurations if one already has a monitor and storage and the other is buying the entire system.
3. Check exact compatibility before ordering
- Model and revision of the motherboard, processor socket and official list of supported processors.
- Minimum BIOS/UEFI version required and available update method if the processor is not initially recognized.
- DDR4 or DDR5 memory type, number of modules and supported capacity. Accelerated memory profiles are not guaranteed for every combination.
- Power supply wattage, connectors, manufacturer recommendations and cable space. Modular cables of different power supplies cannot be mixed without confirmed compatibility.
- Length, width and height of the video card, space after the heatsink installation and access to the power connector.
- Cooler mounting, its height, distance from RAM and mounting positions for the heatsink.
- Type and size of the SSD, protocol supported by the M.2 slot and potential disabled ports due to shared connections.
The same socket alone does not guarantee compatibility. At the same time, an older motherboard can support a newer processor if the manufacturer provides the necessary support.
4. Compare a custom PC with a prebuilt one
Request a complete list of models, including the power supply, motherboard, memory and storage. A prebuilt system can be a good choice if the offer is transparent and the configuration meets requirements. With a custom PC you can more precisely control part selection and reuse existing components.
Compare final cost, warranty conditions, licenses, shipping and testing. Do not judge two computers only by the processor and RAM amount. Avoid promises like “runs any game at maximum” without resolution, settings and measured results.
5. Upgrade or a completely new PC?
First identify the limit of the current system. Upgrading memory or storage can solve a specific problem; changing processor, motherboard and memory does not automatically require replacing the entire PC. Case, power supply, video card and existing drives can remain useful if compatible and in good condition.
Compare two complete quotes: reuse with upgrade and new system. Include checking old parts and cost of possible adaptations. The dedicated SSD/RAM upgrade guide explains separately when these help without replacing analysis of a new configuration.
6. How ordering works at iTechServiceTM
- You communicate budget, games, monitor, applications and parts you want to keep.
- You receive a configuration proposal; models, costs and compatibility are discussed before ordering.
- Components can be ordered within the project or supplied by you. Personal delivery, courier shipping and potential collection from Timișoara or Timiș County are arranged in advance.
- Assembly is done at the iTechServiceTM premises, including verification of components, cabling, startup, temperatures and stability according to the configuration.
- Delivery or shipment of the finished PC is arranged after testing. Packaging, cost and shipping conditions are confirmed before delivery.
Installation of Windows, drivers, programs and license are specified in the offer. Do not assume a license is automatically included in the assembly cost.
Frequently asked questions
How much does a custom-built gaming PC cost?
The cost depends on the games, monitor, components kept and included operations. Request a detailed offer for the complete configuration, not just a price for the processor and graphics card.
Can I send my own components?
Yes, after establishing the list and checking compatibility. The delivery or shipping method is confirmed before sending.
Is the PC tested and can it be delivered by courier?
Assembly includes checks before handover. Courier delivery and system preparation for transport are arranged for the specific order.
Documentation and sources
Supplementary guides: when an SSD or RAM upgrade is worthwhile · The PC restarts during games: power, temperatures or software? · Cleaning the PC and changing thermal paste: when necessary
Discuss your situation with iTechServiceTM
Describe the equipment or project and what you want to achieve. Suitable services, conditions and costs are established before intervention.